Energi Innovation, a Danish green energy EPC and project development company was contracted to install a large-scale solar park at Vandel in Denmark. The solar park will have an estimated power output of 162 MwP.
Vandel Solar Park and Energi Innovation needed to mark out 115,000 points for the positions of the piles for the solar panels. Normally to do this, a person would first manually mark an end point, then mark the second end point of a panel row. Following this, the two end points would be connected in a manual way, including the use of tape measures to mark the lines of the panel rows. This would be repeated across large distances and for each of the panel rows.
To make this process more efficient, Energi Innovation used the TinySurveyor to set out all the points. The existing data could easily be loaded and used by the robot, saving the crew a lot of time and work. The autonomous robot for solar park set-out averaged 230 points per hour during this project.
Vandel solar park – zoomed out
18 kg / 40 lbs
excluding battery
7 km/h / 2.5 mph
max. marking speed
450-750 ml
can size
TinyPremarker setting points.
The TinySurveyor comes with a tablet and an app. The robot settings can be fully customized to suit your needs. Simply insert your data into the app, turn on the robot, start the robot and start saving time.
TinySurveyor and tablet
TinyPremarker tablet solution
TinyPreMarker increases safety, efficiency and accuracy in pre-marking.
Download the flyer to discover the main benefits.
Save for later or share it with a colleague.